ADEMCO Security System - ENTRY;EXIT DELAYS; General Information

ENTRY/EXIT DELAYS
General Information Your system has preset time delays, known as exit delay and entry delay. When
you arm your system, exit delay gives you time to leave through the main door
without setting off an alarm. Entry delay gives you time to disarm the system when
you reenter through the main door. The system must be disarmed, however, before
the entry delay period ends, or an alarm will occur. The console will beep slowly
during the entry delay period, reminding you to disarm the system.
You can also arm the system with no entry delay at all by using either INSTANT or
MAXIMUM arming modes. These modes can provide greater security while you
are sleeping or while you are away for extended periods of time.
See your installer for your delay times and record them here:
Exit Delay:
m
seconds
Entry Delay:
m
seconds
-8-