23
5-6-1 Dual-watch on the dial-frequency and the
memory frequency under CH1.
1. Press the VFO/MîV key to select the VFO mode.
2. Press the F key momentarily. The F indicator should light in the
display.
3. Press the TONE/DUAL key within 10 seconds of pressing the F key. A
"DUAL" will appear on the display to indicate the Dual-watch
operation.
5-6-3 Dual-watch on the dial-frequency and a
memory frequency under scanning in
sequence
1. Press and hold the MR/M key for longer than 1 second. The SCAN
indicator will turn on as a visual reminder the transceiver is scanning.
5-6-2 Dual-watch on the dial-frequency and a
memory frequency.(or call frequency)
1. Recall a memory frequency you wish to use in the dual-watch
function.
2. Press the F key momentarily. The F indicator should light in the
display.
3. Press the TONE/DUAL key within 10 seconds of pressing the F key. A
"DUAL" will appear on the display to indicate the Dual-watch
operation.
4. The display will alternately indicate the dial frequency and a selected
memory frequency.
2. Press the PWR switch to turn OFF the transceiver.
3. Press and hold the TONE/DUAL key and turn on the PWR switch.
4. Release the TONE/DUAL key, A "DUAL" will appear on the display to
indicate the Dual-watch operation.
The display will sequentially indicate the dial-frequency and the
memory frequencies under scanning one by one.
Press and hold the MR/M key for longer than 1 second
To Next Page
Loading...
