7
SAFETY GUIDELINES
The Vision Series LED Video Panel is a sophisticated piece of electronic equipment. To guarantee
smooth operation, it is important to follow all instructions and guidelines in this manual. ADJ is not
responsible for injury and/or damages resulting from the misuse of this panel due to the disregard of
the information printed in this manual. Only qualied and/or certied personnel should perform the
installation of this panel and all included rigging parts and/or accessories. Only the original included
rigging parts and/or rigging accessories for this panel should be used for proper installation. Any
modications to the panel, including to rigging and/or accessories, will void the original manufac-
turer’s warranty and increase the risk of damage and/or personal injury.
PROTECTION CLASS 1 - PANEL MUST BE PROPERLY GROUNDED.
THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS PANEL. DO NOT AT-
TEMPT TO PERFORM ANY REPAIRS BY YOURSELF, AS DOING SO WILL VOID
YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM MODIFICA-
TIONS TO THIS PANEL AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS
AND GUIDELINES IN THIS MANUAL VOID THE MANUFACTURER’S WARRANTY
AND ARE NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG PANEL INTO A DIMMER PACK!
NEVER OPEN THIS PANEL WHILE IN USE!
UNPLUG POWER BEFORE SERVICING PANEL!
NEVER TOUCH FRONT OF PANEL DURING OPERATION, AS IT MAY BE HOT!
KEEP FLAMMABLE MATERIALS AWAY FROM PANEL.
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE PANEL TO RAIN AND/OR MOISTURE!
DO NOT SPILL WATER AND/OR LIQUIDS ON OR INTO THE PANEL!
To Next Page
Loading...
