ADOS S.R.L. Buccinasco (MI)
492-MTU10006 Rev. 4 Page 34 of 49
6.2 Control function selection
The A100E includes the following control functions:
1. parameter configuration
2. weight calibration
3. test
4. system initialization
All the operations are guided by messages in plain text displayed on the display.
The display is used to display/set the value of the parameter to be modified.
To enter the instrument control modality just press the F key.
The instrument prepares to configure the parameters and displays the following message:
C O N F I G
pressing the F key switches the control level and the following messages appear:
C O N F I G
C A L I B R
T E S T
I N I T
pressing the E key confirms the selection made.
Pressing the C key cancels the control request and the system returns to the normal operating modality.
To Next Page
Loading...