Ados A100E - 1. INTRODUCTION; 1.1 General; 1.2 Versions;options; 1.3 Documentation

ADOS S.R.L. Buccinasco (MI)
492-MTU10006 Rev. 4 Page 4 of 49
1. INTRODUCTION
1.1 General
The A100E instrument is a microprocessor based weight amplifier and indicator.
It was designed to connected to a maximum of 6 load cells (350 ? bridge), connected in parallel.
The keyboard can be used to carry out all the programming, configuration and calibration functions.
A series of display messages guides the operator through all the phases.
A series of options sets up the instrument for the main functions related to electronic weighing.
1.2 Versions/options
A
1
0
0
E
X
X
Type of power supply 1 = 115 Vac - 2 = 230 Vac
3 = 24 Vac - 4 = 24 Vcc
5 = 12 Vcc
Version set up for management: Transpallet (T)
SAMPLE ORDER
A100E wired for 230 Vac operation: A 1 0 0 E 2
1.3 Documentation
This technical manual is relevant to the base version of the instrument.
The technical manual is relevant to the transpallet management version is 538-MTU10007.