USING THE SYSTEM
20
The water purification system is connected to the main supply via electric cable that is
supplied with the unit.
In case the supply cord is damaged, it should be replaced with an equivalent cord, in
accordance with manufacturer’s specifications.
Calibration
Adrona water purification systems are already calibrated. Additional calibration is not needed.
USING THE SYSTEM
The system is switched on and off with the main
switch at the left side of the unit
It is necessary to shut off the water supply valve when the system is not under observation.
Display
All functions are accessible via control buttons at the front panel.
The LCD screen displays information regarding water quality, TOC measurements, operation status,
errors and button functions.
Description:
1 – Water quality
2 – Operation status
3 – TOC level/ Filter timer (for Trace
configuration only)
4 – Water temperature
5 – Error message/ system status
6 – Pressure status
7 – Dispense volume
8 – Tank level status
Detailed description of each line can be found in the table below:
To Next Page