ADS-tec OPC8008 - Safety Notices Prior to Beginning Installation

OPC8000 series 28
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
4.10 Safety notices prior to beginning installation
ATTENTION
The grub screw of the Quick Snap element
must not protrude when folding in, but must
rather be flush with the tensioner!
Non-compliance may result in damage to
the device!
ATTENTION
The grub screws must not be screwed in
while folded in!
Non-compliance may result in damage to
the touch-screen of the device!