OPC8000 series 43
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
programmes, we cannot ensure that the soft keyboard works properly
with all available software.
When deactivating the soft keyboard, the previously active state
(alphanumeric / numeric keys or function keys) will be stored and will
be displayed when re-activating the keyboard. This setting can be
configured.
Pos: 22 /Datentec hnik/Bedienung/T ouch Screen/T ouch Screen für VMT 60 xx @ 1\mod_12463 61069977_6.d oc @ 5853 @
6.3 Touch screen
The control system is equipped with a touch screen monitor. The touch screen is internally
connected via the USB interface. The driver software necessary for use is already integrated
in the respective operating system.
Pos: 23 /Datentec hnik/Bedienung/ Status-Anzeig en/SYS-LED/S YS-LED für VMT 60xx-Serie @ 2\mod_12605 25540269_6.doc @ 6876 @
Note:
The corresponding driver can be downloaded
http://www.ads-tec.de/industrial-it/download/treiber.html in the device
series.
6.4 Status displays
SYS LED
Depending on the type of flashing different device states are displayed by the SYS LED.
The following signals are displayed:
LED off Device is switched off (POWER OFF)
LED green Device is ready for operation (POWER ON)
LED yellow flashing Adaption of Volume /
LED yellow Min-/Max value of brightness has been reached
Pos: 25 /Datentec hnik/Schnittstell en/Schnittstell eneinstellung/Sc hnittstelleneins tellung für VMT- Serie / PLC 5 00 @ 0\mod_1 15891629661 2_6.doc @ 51 7 @
To Next Page
Loading...