ADS-tec OPC8008 - Environmental Conditions

To Next Page

To Previous Page

OPC8000 series 9

2.8 Environmental conditions

The device can be put into operation and used under the following conditions. Failure to

observe any one of these conditions will invalidate the warranty. ADS-TEC cannot be held

liable for any damages arising from improper use and handling.

 Temperature for OPC8008

in operation 0 to +55°C*

(*only with Flash SSD)

for storage -20 to +55°C

 Temperature for OPC8013/8015 devices

in operation +5 to +45°C

in operation -20 to +60°C*

(*only with Flash SSD, automotive hard disk or 2.5" Industrial SSD)

for storage -30 to +65°C

for storage -30 to +75°C*

(*only with Flash SSD, automotive hard disk or 2.5" Industrial SSD)

 Temperature for OPC8022 device

in operation +5 to +45°C

for storage -20 to +60°C

 Humidity

in operation 10 to 85% without condensate

for storage 10 to 85% without condensate

 Vibration

in operation 1 G, 10 to 500 Hz

(DIN EN 60068-2-6)

 Shock resistance

in operation 5 G, with a 30 ms half-cycle

(DIN EN 60068-2-27)