OPC8000 series 3
© ADS-TEC GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
5.5 Check for operational readiness 38
6 Operation ......................................................................................................................................... 39
6.1 Front panel operation keys 39
6.1.1 Functions while the operating system is running 39
6.1.2 Switching-on function 40
6.1.3 Activating the front keys for the boot menu and BIOS 41
6.2 Soft keyboard 42
6.3 Touch screen 43
6.4 Status displays 43
7 Interfaces ......................................................................................................................................... 44
7.1 Interface setup 44
7.2 Voltage supply 24V DC 44
7.3 USB connections 44
7.4 Network connection (RJ45) 45
7.5 Serial interface COM (RS232) 46
8 Drives ............................................................................................................................................... 47
8.1 Hard disk / Flash SSD 47
8.2 External drives 47
9 Software ........................................................................................................................................... 48
9.1 Configuration Center 48
10 Technical details ............................................................................................................................. 49
11 Service & support ........................................................................................................................... 51
11.1 ADS-TEC support 51
11.2 Company address 51
12 Component replacement ................................................................................................................ 52
12.1 Opening the service slot (OPC8008) 52
12.2 Opening the service slot (OPC8013-8022) 54
12.3 Replacing the lithium battery (OPC8000 series) 56
12.4 Replacing the HDD (hard disk) (OPC8013-8022) 57
12.5 Replacing the fan (OPC8013-8022) 58
12.6 Replacing the working memory (RAM) (OPC8013-8022) 59
12.7 Replacing the mSATA modules (OPC8000 series) 60