ADT 6270ADT User Manual

SECTION 4: Initial Setup
4–7
How to Set the NIGHT Setup Button Function
The NIGHT button can be set to arm the system in one of four arming
modes:
x
Away - When selected, arms all zones with entry delay.
x
Stay - When selected, arms perimeter zones with entry delay.
x
Instant - When selected, arms perimeter zones without entry
delay.
x
Maximum - When selected, arms all zones without entry delay.
To set the NIGHT button function, do the following:
SCREEN ACTION
1. On the “Central Station” screen press
the
Night Setup
button. A Night Setup:
pop-up window is displayed with options
for selecting Away, Stay, Instant, and
Maximum.
2. Select the arming mode that will be
activated by pressing the
NIGHT
button
on the "Arming" screen. Press the
Ok
button to accept the setting, or press the
Cancel
button to cancel your selection. In
either case the 6270ADT goes to the
"Central Station" menu screen.

ADT 6270ADT Specifications

General

Brand	ADT
Model	6270ADT
Category	Touch Panel
Language	English