5–1
SECTION 5
User Codes
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
In This Section
♦
Introduction to User Code
Setup
♦
How to Access User Setup
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Introduction to User Code Setup
Each user must be assigned a name with a corresponding 4-digit user
code in order to gain access to various features and functions.
Through the 6270ADT, you may program users to access any and all
of the following systems:
x
Fire/Burglary (Security)
x
Lighting
x
Messages
Users for the systems are programmed in a central user setup
location that provides the specific questions for the user pertaining to
each system. You may want these users to be the same, but there are
situations in which you may want a user to have access to one system
(e.g., Messages) without having access to another (e.g., the
Fire/Burglary system).
How to Access User Setup
Access User Setup as follows:
1. From the "Home" screen, press the
SECURITY
button. The "Arming" screen
is displayed.
To Next Page
Loading...