ADT 6270ADT - Audio Test

6270ADT Installation and Setup Guide
7–6
Audio Test
Perform the Audio Test as follows:
SCREEN ACTION
When you press the
Test
button
associated with the Audio Test "Testing.."
is displayed in the test status column on
the "Diagnostics" screen while beeps
sound from the speaker. At the
conclusion of the test, a pop-up
"Confirmation Window" is displayed in the
center of the "Diagnostics" screen.
Within the Confirmation Window the
question "Did you hear Beep?" is
displayed.
When you press the
Yes
button, "Passed"
is displayed in the test status column on
the "Diagnostics" screen.
When you press the
No
button, "Failed."
is displayed in the test status column on
the "Diagnostics" screen.