Advanced Diagnostics TCODE PRO - Erase Keys - Type 2

545
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
VEHICLE SELECTION
MITSUBISHI
NISSAN
SUZUKI
> TOYOTA
V.W./AUDI GROUP
VEHICLE SELECTION
> Immobilizer
REMOTE
VEHICLE SELECTION
TYPE 1
> TYPE 2
ECU IDENTIFICATION
LEXUS TYPE 1
PRESS ENTER KEY
SWITCH IGNITION ON
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
LIVE DATA
ACTUATORS
> SPECIAL FUNCTIONS
DIAGNOSTIC MENU
RESET Immobilizer
PROGRAM KEY
> ERASE KEYS
ERASE KEYS
SWITCH IGNITION OFF
REMOVE KEY
INSERT KEY
SWITCH IGNITION ON
WITHIN 120 Sec
TIME ELAPSED: 0 S
PRESS ENTER KEY
PLEASE WAIT
TRYING TO COMMUNICATE
NOTE: If you do not have an existing Master key, you must use the “Reset Immobilizer” procedure to Reset
the Immobilizer system. A Valet key will not work as a substitute for a Master Key.
ERASE KEYS
SWITCH IGNITION OFF
REMOVE KEY
WITHIN 10 Sec
TIME ELAPSED: 0 S
ERASE KEYS
PROCEDURE COMPLETE
PRESS ENTER KEY
Note: If you get an Error
message screen, disconnect and
remove the key.
Wait 20 seconds and start over.
Insert a Master key that is already registered into the vehicle. Turn the ignition lock to the “ON”
position. The Security Light must be out when the key is in. Connect and follow screens.
ERASE KEYS - TYPE 2
MVP &
TCODE
TOYOTA
ADVANCED DIAGNOSTICS USA
powered
by
MVP &
TCODE
PRIUS ‘04-’09
ADVANCED DIAGNOSTICS USA
powered
by
MVP &
TCODE
TOYOTA
ADVANCED DIAGNOSTICS USA
powered
by