Advanced Diagnostics TCODE PRO - Erase Keys - Type 1

540
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
VEHICLE SELECTION
MITSUBISHI
NISSAN
SUZUKI
> TOYOTA
V.W./AUDI GROUP
VEHICLE SELECTION
> Immobilizer
REMOTE
VEHICLE SELECTION
> TYPE 1
TYPE 2
ECU IDENTIFICATION
LEXUS TYPE 1
PRESS ENTER KEY
SWITCH IGNITION ON
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
DIAGNOSTIC MENU
RESET Immobilizer
ADD MASTER KEY
ADD VALET KEY
> ERASE KEYS
ERASE KEYS
WARNING
FOLLOW NEXT SCREENS
QUICKLY & CAREFULLY
PRESS ENTER KEY
ERASE KEYS
SWITCH IGNITION OFF
REMOVE MASTER KEY
WITHIN 10 Sec
TIME ELAPSED: 1 S
NOTE: If you do not have an existing Master key, you must use the “Reset Immobilizer” procedure to Reset
the Immobilizer system. A Valet key will not work as a substitute for a Master Key.
ERASE KEYS
INSERT MASTER KEY
SWITCH IGNITION ON
PRESS ENTER KEY
PLEASE WAIT
TRYING TO COMMUNICATE
ERASE KEYS
PROCEDURE COMPLETE
PRESS ENTER KEY
Note: If you get an Error message screen,
disconnect and remove the key.
Wait 20 seconds and start over.
Insert a Master key that is already registered into the vehicle. Turn the ignition lock to the “ON”
position. The Security Light must be out when the key is in. Connect and follow screens.
ERASE KEYS - TYPE 1
MVP &
TCODE
TOYOTA
ADVANCED DIAGNOSTICS USA
powered
by
MVP &
TCODE
ADVANCED DIAGNOSTICS USA
powered
by
PRIUS ‘04-’09
MVP &
TCODE
TOYOTA
ADVANCED DIAGNOSTICS USA
powered
by