Advanced Diagnostics TCODE PRO - Alternative - On-Board Programming for Prox and RKE Functions

To Next Page

To Previous Page

588

Step 1- It's very important to make sure all the doors are closed except the

drivers door, that remains open.

Step 2- insert the Prox in and out of the slot twice.

Step 3- close drivers door twice, then leave it open.

Step 4- insert the Prox in slot once and pull it out.

Step 5- close the drivers door twice, then leave it open.

Step 6- insert the Prox in the slot & leave it in.

Step 7- close the drivers door once.

Step 8- turn the ignition on once, then turn it off.

Step 9- take the Prox out of the slot and the door locks should cycle.

Step 10- Next press the lock & unlock buttons together on the Prox for 1 sec-

ond. Then press the lock button for 3 seconds.

Step 11- locks should cycle.

Step 12-To exit the learning mode open the door & close it.

Now open it again.

You are done! Now test your Prox key functions to be sure they work.

Alternative - On-Board Programming

for Prox and RKE functions

Included here as a courtesy,

Not supported by Tech Support.

MVP &

TCODE

TOYOTA

ADVANCED DIAGNOSTICS USA

powered

Other manuals for Advanced Diagnostics TCODE PRO