EasyManua.ls Logo

Advanced Diagnostics TCODE PRO - Page 47

Default Icon
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
581
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
Prius ‘04-’09 Special Instructions
STEP #2
Continued from previous page
Use your
Smart Card and
avoid the Web
Security Access.
Make sure that the vehicle is turned “ON”
See trick on the previous page to turn the
car ON without the Fob trapped in the
slot.
ECU IDENTIFICATION
TOYOTA/LEXUS REMOTE TYPE3
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
FAULT CODES
> SPECIAL FUNCTIONS
It’s normal for the ECU ID screen here to
read TYPE3 even though we are actually
selecting PROXIMITY TYPE5
DIAGNOSTIC MENU
PROGRAM REMOTE
ERASE REMOTE
> RESET ECU
RESET ECU will clear all programmed
Prox’s from memory
RESET Immobilizer
PLEASE INSURE THAT
THE DRIVER DOOR IS -
OPEN DURING THE
PROCEDURE
PRESS ENTER KEY
Even though the screen above says
immobilizer we are actually resetting the
Prox and RKE functions here.
Make sure the drivers door does not
close during the following steps or the
procedure will fail.
PROGRAM KEYS
PROCEDURE COMPLETE
PRESS ENTER KEY
If the screen above comes up right away
without going thru the 16 min. reset time
this is a “glitch” in the software. Stay
connected and go back to the menu and
select RESET ECU again. The driver’s
door open warning screen should come
up and then the following screen should
be next.......
continued on next page >
MVP &
TCODE
TOYOTA
ADVANCED DIAGNOSTICS USA
powered
by

Other manuals for Advanced Diagnostics TCODE PRO

Related product manuals