Chapter 4 Command Set 4-49
$AA2
Example command: $452(cr)
response: !45050600(cr)
The command asks the analog input module at address 45h to
send its configuration data.
The analog input module at address 45h responds with an input
range of 2.5 volts, a baud rate of 9600 bps,
an integration time of
50 ms (60 Hz), engineering units are the currently configured
data format, and no checksum function or checksum generation.
4011, 4011D, 4012, 4013, 4015, 4016,
4017, 4017+, 4018, 4018+, 4018M, 4019
To Next Page
Loading...