Chapter 4 Command Set 4-155
4050, 4052, 4053, 4060, 4051, 4055, 4068
Chapter 4
$AA6
Example command: $336(cr)
response: !112200(cr)
The first two characters of the response, value 11h (00010001),
indicate that digital output channels 0 and 4 are ON, channels 1,
2, 3, 5, 6, 7 are OFF.
The second two characters of the response,
value 22h (00100010), indicate that digital input channels 1 and
5 are HIGH, channels 0, 2, 3, 4, 6, 7 are LOW.
Example command: $036(cr)
response: !BEDE00(cr)
The first two characters of the response, value BEh(10111110),
indicate that digital input channels 8 and 14 are LOW, channels
9, 10, 11, 12, 13 and 15 are HIGH. The second two characters of
the response value DEh (11011110) indicae that digital input
channels 0 and 5 are LOW, channels 1, 2, 3, 4, 6, 7 are HIGH.
To Next Page
Loading...
Need help?
General
