ADAM-5510/P31 5-11
Chapter 5
You may encounter one of the above error messages while trying to
send messages from Paradym-31 to the ADAM-5510/P31. The cause
of the problem could be a conflict at the Com Port. For example, if you
are executing ADAM5510.EXE, and select a COM port, and at the
same time select the same Com Port with Paradym-31, then you will get
this kind of error message when you run the “Download’, ‘Start’ or
‘Stop’ functions. You need to close other relevant programs if this
problem occurs.
F Unable to stop the program from Paradym-31
This problem may result from a defective UDFB ( User Defined
Function Block ). The defect will probably be in a UDFB you devel-
oped, and may be an infinite loop or something else that disables you
from terminating the program under Paradym-31. Please follow the
hints below.
To Next Page
Loading...
Need help?
General
