Advantech ADAM-5510/P31 - User Manual

Allowances made for Millennium Bug
We assert that the ADAM-5510/P31 will not initiate any millennium
bug problems (so-called Y2K problems). Although ADAM-5510/
P31 contains a real time clock, Advantech has taken action to make
the ADAM-5510/P31 immune to the Y2K problem.
Copyright Notice
This document is copyrighted, 2000, by Advantech Co., Ltd. All
rights are reserved. Advantech Co., Ltd., reserves the right to make
improvements to the products described in this manual at any time
without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this
manual is intended to be accurate and reliable. However, Advan-
tech Co., Ltd. assumes no responsibility for its use, nor for any
infringements upon the rights of third parties which may result from
its use.
Acknowledgments
Advantech Paradym 31, ADAM-5510/P31 and ADAM are trade-
marks of Advantech Co., Ltd.
IBM and PC are trademarks of International Business Machines
Corporation.
Part No. 2000551001 2nd Edition
Printed in Taiwan March 2000

Advantech ADAM-5510/P31 Specifications

General

Model	ADAM-5510/P31
Type	Programmable Automation Controller
Power Supply	24 VDC
Flash Memory/ROM	512 KB
Communication Ports	RS-232, RS-485

Summary

Quick Start Guide

System Requirements

Lists hardware and software prerequisites for installation.

Installation Guide

Provides step-by-step instructions for installing the ADAM-5510/P31.

Utility Application Program

Introduces the ADAM5510.EXE utility for configuration and calibration.

Introduction to ADAM-5510;P31

Standalone Data Acquisition and Control System

Explains the system's role in industrial data acquisition and control.

RS-232;485 Communication Ability

Details the system's three serial communication ports for connectivity.

Built-in Real-time Clock and Watchdog Timer

Explains the real-time clock and watchdog timer for system stability.

Installation Guidelines

Starting up ADAM-5510;P31

Guides on reviewing system requirements and initial setup.

Module Installation Process

Provides instructions for physically installing I/O modules into the system.

Jumper and DIP Switch Settings

Guides on configuring jumpers and DIP switches for system setup.

Wiring and Connections

Details power supply, I/O modules, and port wiring procedures.

System Specifications

Major Features of ADAM-5510;P31

Technical Specifications

Lists detailed technical specifications including CPU, OS, memory, and ports.

I;O Modules

RTD Input Module (ADAM-5013)

Analog Input Modules

Analog Output Modules (ADAM-5024)

Digital Input;Output Modules

Relay Output Modules

Counter;Frequency Module (ADAM-5080)

Troubleshooting Guide

Communication Failure

System Indicators Explained

Troubleshooting Remote Download

Appendix D: Performance

ADAM-5510;P31 Standalone Performance

Appendix E: RS-485 Network

RS-485 Network Specifications

Basic Network Layouts

RS-485 Data Flow Control

Appendix F: System Grounding Installation

Power Supplies Wiring Scheme

Grounding Installation Guidance

Requirements for RS-485 Signal Wires

Appendix G: Grounding Reference

Grounding Concepts Overview

Noise Reduction Techniques

Grounding and Connection Check Point List