AIMB-279 User Manual 92
7.1 Introduction
The AIMB-279 has two Gigabit Ethernet LANs via dedicated PCI Express x1 lanes,
Intel® i226 and I219LM (Phy) that offer bandwidth of up to 500 MB/sec, eliminating
the bottleneck of network data flow and incorporating Gigabit Ethernet at 2500 Mbps.
7.2 Features
Integrated 10/100/1000/2500 Mbps transceiver
10/100/1000/2500 Mbps triple-speed MAC
High-speed RISC core with 24KB cache
On-chip voltage regulation
Wake-on-LAN (WOL) support
PCI Express x1 host interface
7.3 Installation
AIMB-279’s Intel® i226 and Intel® i219LM Gigabit integrated controllers support all
major network operating systems. However, the installation procedure varies from
system to system. Please find and use the section that provides the driver setup pro-
cedure for the OS you are using.
7.4 Windows® 10 Driver Setup (Intel® i219LM &
Intel® i226)
Download the driver from the support website to your computer and decompress the
file. Select “Autorun”, then navigate to the directory for your OS.
Note! Before installing this driver, make sure the CSI utility has been installed
in your system. See Chapter 5 for information on installing the CSI util-
ity.
Note! Before installing this driver, make sure the CSI utility has been installed
in your system. See Chapter 5 for information on installing the CSI util-
ity.
To Next Page
Loading...
