Need help?Do you have a question about the Advantech UNO-2484G V2 and is the answer not in the manual?
General| Brand | Advantech |
|---|---|
| Model | UNO-2484G V2 |
| Category | Computer Hardware |
| Language | English |
Provides information and technical support services for Advantech products.
Lists the specific UNO-2484G V2 model numbers covered by this manual.
Outlines the terms and conditions for the 2-year product warranty.
Provides a step-by-step guide for submitting a warranty claim.
Details CE testing requirements and recommendations for the product.
Explains FCC Class A compliance for commercial environments.
Instructions for obtaining technical support from Advantech.
Guidance on preventing damage from static electricity during handling.
Covers basic safety rules for operating and maintaining the equipment.
Advises on suitable environments and handling procedures for the device.
Details conditions requiring professional service and battery replacement safety.
Provides an overview of the UNO-2484G V2 platform and its capabilities.
Highlights essential safety measures for using the UNO-2484G V2.
Lists all items included in the product package.
Details the technical hardware specifications of the UNO-2484G V2.
General physical and power specifications of the device.
Specifications related to the system's internal hardware components.
Lists and describes the input/output interfaces available on the device.
Specifies operating and storage environmental conditions.
Lists the product's certifications and compliance standards.
Information on optional extension kits for enhanced functionality.
Provides the physical dimensions of the UNO-2484G V2.
Introduces the chapter on setting up UNO-2484G V2 hardware functions.
Details the four standard COM serial communication ports on the device.
Describes the RS-232/422/485 COM port specifications and BIOS settings.
Explains the Phoenix connector for external DC power input.
Details the Gigabit LAN controllers and RJ-45 connectors.
Describes the USB 3.2 and USB 2.0 ports with plug-and-play support.
Details the HDMI 1.4 connector for high-resolution display output.
Details the DP 1.4a connector for high-resolution display output.
Information about the RTC battery for retaining system clock and BIOS settings.
Explains the power button functionality and ATX mode configuration.
Describes the function of the hardware reset button.
Details the mPCIe sockets for expansion modules.
Describes the M.2 B Key connector for M.2 cards and SIM slot.
Details the M.2 M Key connector for NVMe SSD storage modules.
Describes the Nano SIM slot for LTE function, requiring an M.2 B key module.
Explains the status indicated by the system's power and RTC battery LEDs.
Diagrams showing the location of internal connectors on the motherboard.
Lists and categorizes external and internal connectors and jumpers.
Introduces the chapter on setting up UNO-2484G V2 hardware functions.
Details the four standard COM serial communication ports on the device.
Describes the RS-232/422/485 COM port specifications and BIOS settings.
Explains the Phoenix connector for external DC power input.
Details the Gigabit LAN controllers and RJ-45 connectors.
Describes the USB 3.2 and USB 2.0 ports with plug-and-play support.
Details the HDMI 1.4 connector for high-resolution display output.
Details the DP 1.4a connector for high-resolution display output.
Information about the RTC battery for retaining system clock and BIOS settings.
Explains the power button functionality and ATX mode configuration.
Describes the function of the hardware reset button.
Details the mPCIe sockets for expansion modules.
Describes the M.2 B Key connector for M.2 cards and SIM slot.
Details the M.2 M Key connector for NVMe SSD storage modules.
Describes the Nano SIM slot for LTE function, requiring an M.2 B key module.
Explains the status indicated by the system's power and RTC battery LEDs.
Diagrams showing the location of internal connectors on the motherboard.
Lists and categorizes external and internal connectors and jumpers.
Provides instructions for grounding the UNO-2484G V2 for EMI protection.
Details how to connect the external DC power supply to the device.
Instructions on how to open and close the rear cover of the unit.
Step-by-step guide for installing an NVME module into the rear cover.
Steps for inserting the NVME card and applying the thermal pad.
Final steps for closing the rear cover after NVME module installation.
Instructions for removing the rear cover to install a miniPCIe module.
Steps for inserting the miniPCIe card and closing the rear cover.
Instructions for removing the rear cover to install an M.2 B Key module.
Steps for removing the pre-assy iron part and inserting the M.2 2252 module.
Steps for applying the thermal pad and closing the rear cover.
Instructions for removing the rear cover to install an M.2 B key 2242 module.
Steps for inserting the M.2 2242 module and applying the thermal pad.
Final steps for closing the rear cover after M.2 module installation.
Instructions for removing the rear cover to install a 2.5” SSD module.
Steps for removing the SSD bracket and screws.
Steps for assembling the SSD onto the bracket and the system.
Final steps for re-attaching the SSD bracket and closing the rear cover.
Instructions for removing the rear cover to install an expansion kit.
Steps for assembling the second stack with screws.
Final steps for closing the rear cover after expansion kit installation.
Introduces how to modify BIOS settings using the AMI BIOS Setup Utility.
Explains how to access and navigate the BIOS Setup Utility.
Describes the main screen and navigation within the BIOS Setup Utility.
Details system time and date settings within the BIOS.
Guides users through advanced BIOS setup options.
Covers various CPU configuration parameters within the BIOS.
Explains specific CPU features like C6DRAM, Flex Ratio, and Virtualization.
Details power and performance management settings in the BIOS.
Configuration options for CPU power management and performance.
Explains Intel Speedstep, HDC Control, and Turbo options.
Settings for configuring CPU turbo boost frequencies and power limits.
Details energy efficient P-state, package power limits, and turbo ratio overrides.
Settings for configuring Thermal Design Power (TDP) for the CPU.
Explains TDP power limits, time windows, and platform power limit settings.
Manages the graphics (GT) frequency and power settings.
Option to disable the turbo frequency limitation for the graphics core.
Configuration for Intel Active Management Technology.
Configuration settings for the Platform Controller Hub Firmware.
Enables/disables AMT USB provisioning.
Enables/disables MAC pass through functionality.
Configuration for Remote Assistance Process parameters.
Configuration for Alert Standard Format parameters.
Enables/disables PET Events Progress.
Enables/disables the WatchDog Timer.
Settings for securely erasing storage devices.
Defines the behavior of the secure erase function.
Configuration options for OEM-specific flags.
Configures the MEBx selection screen options.
Hides the prompt for ME unconfiguration.
Resolution settings for MEBx display modes.
Settings for managing firmware updates.
Enables/disables ME FW Image Re-Flash function.
Settings related to Trusted Computing features.
Enables or disables SHA-1 PCR Bank.
Enables or disables SHA256 PCR Bank.
Schedules security device operations.
Enables or disables Platform Hierarchy.
Enables or disables Storage Hierarchy.
Enables or disables Endorsement Hierarchy.
Selects the TCG2 Spec Version Support.
Selects the TPM device type for support.
System ACPI parameters and configuration.
Configuration for COM2 UART mode settings.
Settings for ACPI auto configuration, hibernation, and sleep states.
Configuration for the NCT61260 Super IO chip.
Details serial port configurations for the Super IO chip.
Monitors hardware status and PC health.
Settings for waking the system from S5 using the RTC alarm.
Enables or disables system wake on alarm event.
Configuration parameters for USB ports.
Enables or disables legacy USB support.
Workaround for OS without XHCI hand-off support.
Enables/disables USB Mass Storage Driver Support.
USB port disable override and overcurrent settings.
Settings for the network stack, including PXE and HTTP boot.
Configuration for CSM support and option ROM execution.
NVMe device option settings.
Chipset configuration options.
System Agent (SA) parameters and configuration.
Graphics configuration and VMD setup menu.
Platform Controller Hub Input/Output configuration parameters.
PCI Express configuration settings.
Control settings for PCI Express root ports and PCIe speed.
Settings for SATA controllers, modes, speed, and hot-plug.
Settings for USB PD0 programming, overcurrent, and port disable override.
Enable/disable Onboard LAN1, PXE OpROM, and Wake on LAN.
Enable/disable Onboard LAN2 and its PXE OpROM.
Enable/disable Onboard LAN3 and its PXE OpROM.
Enable/disable Onboard LAN4 and its PXE OpROM.
PCIe Wake settings.
Enables/disables ErP function.
Security settings including administrator password and secure boot.
Set or change the administrator password for BIOS access.
Secure Boot feature activation and mode options.
Options for Standard or Custom Secure Boot modes.
Forces system to user mode and installs factory default keys.
Installs factory default secure boot keys.
Enrolls factory defaults or loads certificates.
Restores DB variables to factory defaults.
TCG storage device security configuration.
Configuration settings for system boot options.
Settings for setup prompt timeout, NumLock state, and quiet boot.
Defines the system boot order.
Options for saving changes, discarding changes, and exiting BIOS setup.
Pin assignments for the DC power input connector.
Jumper configuration for clearing CMOS settings.
Pin assignments for USB 2.0 and USB 3.2 connectors.
Details the pinout for the USB 2.0 connector.
Details the pinout for the USB 3.2 connector.
Pin assignments for the HDMI port adapter cable.
Pin assignments for the M.2 B-Key connector.
Pin assignments for the M.2 M-Key connector.
Pin assignments for the mPCIe connectors.
Pinout details for COM ports supporting RS232, RS422, and RS485.
Pinout and LED status information for the RJ45 LAN connectors.
Pin assignments for the 9-pin GPIO connector.
Pin assignments for the DisplayPort connector.
Pin assignments for the USB Type-C connector.
Jumper settings for selecting between AT and ATX power modes.
Configuration for DC input for iDoor modules.
Details on slide switch settings for 5G module compatibility.
Functionality of FP1 for connecting power to iDoor modules.
Steps to enable VMD for RAID0/RAID1 support.
To Next Page
