EasyManua.ls Logo

Advantech PCA-6145B User Manual

Advantech PCA-6145B
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PCA-6145B
Half-size 486 All-in-one
CPU Card with
Panel/CRT and Ethernet Interface
PCA-6145L
Half-size 486 All-in-one
CPU Card with
Panel/CRT Interface

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Advantech PCA-6145B and is the answer not in the manual?

Advantech PCA-6145B Specifications

General IconGeneral
BrandAdvantech
ModelPCA-6145B
CategoryComputer Hardware
LanguageEnglish

Summary

Chapter 1 Hardware Configuration

Specifications

Details the technical specifications of the CPU card, including CPU, RAM, interfaces, and dimensions.

Jumpers and Connectors

Lists and describes the function of all jumpers and external connectors on the CPU card.

Safety Precautions

Outlines essential safety measures to prevent damage to the hardware and ensure user safety.

Jumper Settings

Explains how to configure the card's hardware settings using jumpers.

CPU Type Select

Details jumper configurations for selecting the installed CPU type for optimal system function.

Chapter 2 Connecting Peripherals

System Safety Warnings

Provides critical warnings regarding power disconnection and static discharge before handling components.

Chapter 3 AWARD BIOS SETUP

Standard CMOS Setup

Covers configuring date, time, hard disk, floppy drive, display, and memory settings.

BIOS Features Setup

Allows configuration of various BIOS features like virus warning, boot sequence, and cache settings.

Chipset Features Setup

Enables configuration of chipset-specific features for optimal performance and compatibility.

Power Management Setup

Controls the CPU board's "green" features, including doze, sleep, and suspended modes.

Chapter 4 VGA Display & Ethernet Configuration

VGA Display Software Configuration

Details how to configure the on-board VGA for various LCD and CRT displays using software.

Ethernet Software Configuration

Explains how to configure the on-board Ethernet interface using the DIAG 9008.EXE program.

Chapter 5 SVGA Setup

Display Modes

Explains how to set the display to use CRT, flat panel, or both simultaneously.

Driver Installation

Covers necessary prerequisites and steps for installing display drivers from the diskette.

Windows Setup

Provides step-by-step instructions for installing display drivers within Windows 3.1.

DOS Setup

Guides users through installing display drivers from the DOS command prompt.

Appendix B Upgrading

Installing PC/104 Modules (CN5,CN6)

Instructions for connecting and utilizing PC/104 expansion modules on the CPU card.

Installing DRAM (SIMMs)

Details the process of installing DRAM modules (SIMMs) into the 72-pin socket.

Appendix C Detailed System Information

DMA Channel Assignments

Lists the functions assigned to each Direct Memory Access (DMA) channel.

DMA Controller Registers

Describes the addresses and command codes for DMA controller registers.

DMA Page Addresses

Provides the I/O addresses for DMA page registers, used for memory mapping.

Interrupt Assignments

Details the interrupt request (IRQ) assignments and their corresponding interrupt sources.

Appendix D POST LEDs

POST Checkpoint LED Indicators

Lists checkpoint codes generated by AWARD BIOS POST and their meanings.

Related product manuals