Advantech PCA-6145B User Manual

36 PCA-6145B/6145L User's Manual
2. At the prompt, type AWDFLASH.EXE and press <Enter>. The
VGA configuration program will then display the following:
VGA Setup screen
3. At the prompt, type in the BIN file which supports your
display. When you are sure that you have entered the file name
correctly press <Enter>. The screen will ask “Do you want to
save?” If you wish to continue press Y. If you change your
mind or have made a mistake press N to abort and end the
setup procedure.
4. If you decide to continue, the program will create a
BIOS.OLD file which contains the existing BIOS configura-
tion. The prompt will then ask “Are you sure you want to save
new configuration?” Press Y if you want the new file to be
written into the BIOS. Press N to exit the program.
The new VGA configuration will then write to the ROM BIOS
chip. This configuration will remain the same until you run the
AWDFLASH.EXE program and change the settings.
VGA Win 95 Driver Support
These drivers are designed to work with Microsoft Windows 95.
You may install these drivers through Windows 95.

Advantech PCA-6145B Specifications

General

Brand	Advantech
Model	PCA-6145B
Category	Computer Hardware
Language	English