Advantech UNO-148 - Power Connector; LAN: Ethernet Connector; USB Connector; Display Connector

UNO-148 User Manual 16
2.2.5 Power Connector
UNO-148 comes with a Phoenix connector that carries 10 - 36 V
DC
external power
input, and features reversed wiring protection. Therefore, the system will not accrue
damage from reversed polarity of ground lines and power lines.
2.2.6 LAN: Ethernet Connector
UNO-148 is equipped with two Gigabit LAN controllers. An Intel
®
i210/i219/i225
Ethernet controller that complies with IEEE 802.3u 10/100/1000/2500 Base-T is used
as the controller chip. The Ethernet port is a standard RJ-45 jack. Additionally, LED
indicators are provided on the front of the device to indicate the system’s Link (off/
green/orange) and Active (green) status.
2.2.7 USB Connector
UNO-148 features 4x USB ports that comply with USB EHCI, 3 for Rev. 3.2, 1 for
Rev. 2.0 (Type A) specifications. The USB connectors support plug-and-play and hot-
swap- ping functionality for external devices. Additionally, this can be enabled/dis-
abled in the BIOS menu.
2.2.8 Display Connector
The UNO-148 provides 2x DP 1.4 connector for a high resolution interface up to
7680x 3840 @ 60Hz, It also supports DP++ that can be compatible with passive
adapter.