6 AI-5620 User Guide
For detailed step-by-step instructions on installing the driver, see Appendix A: USB
Driver Installation on page 23. The following is a summary of the installation procedure.
1. Download the USB driver installation package from our website or from the
CDrom.
2. Double click on the self-extracting installer. This normally requires using the
administrator privileges in Vista and Windows 10 & 11
3. The installer will decompress the files and prompt you through the steps to
install the driver files.
5. A message should be displayed indicating the successful installation of the two
driver files.
1.6 Where to go from Here
Once the AI-5620 has been powered up and connected to the PC, the next step is
determined by the end user application. This is generally either using the TRsSim
software to provide a graphical user interface for controlling the unit and performing
tests, or developing custom control software with the Windows .NET Assembly.
To Next Page
Loading...