Copyright 2024 - Advent Instruments Inc. All rights reserved.
Printed in Canada
Advent Instruments Inc.
111 - 1515 Broadway Street
Port Coquitlam, BC, V3C6M2
Canada
Internet: techsupport@adventinstruments.com
sales@adventinstruments.com
Web Site: http://www.adventinstruments.com
Telephone: (604) 944-4298
Safety Symbols and Terms
When the
symbol is present on an instrument it indicates that the operators should refer to the User
Guide for more information.
When the symbol is present it indicates a terminal that is connected to the functional ground of the
instrument.
When the symbol is present it indicates that the surface may be hot. Avoid contact with the surface
of the instrument to avoid burns.
When the symbol is present near a screw it should be connected to a safety earth ground using a
wire recommended in the User Guide.
Installation Categories
Advent Instruments products are designed for use and to measure electrical signals that are rated
Measurement Category I as described in the International Electrotechnical Commission (IEC) Standard
IEC 606064. The equipment measurement terminals are not designed to be directly connected to the mains
voltage or a voltage source with high transient over-voltages.
To Next Page
Loading...