71
Steam Generation System
1 Attention: Wipe the steam generator dry after each use. Soak up wa-
ter with a sponge.
3 Remove any lime residue with water and vinegar.
To prevent limescale forming, use decalcified water only, for example,
from a water filter.
1 Attention: Chemical de-scaling agents can damage the oven's surface
enamel. Always follow the manufacturer's instructions carefully.
Water Drawer and Steam Generator
1. Pour water and vinegar
(about 300ml) into the steam gen-
erator.
Leave it to take effect.
2. Remove the water and vinegar with
a non-abrasive sponge.
3. Rinse out the steam generator sys-
tem through the water drawer us-
ing clean, decalcified water
(100-200 ml).
4. Soak up remaining water from the steam generator with the sponge
and wipe dry.
5. Leave the door open to let the oven dry out completely.
To Next Page
Loading...
