77
Installation Instructions
1
Important: Any electrical installation work must be carried out by a
qualified electrician/competent person.
The oven must be installed according to the instructions supplied.
1 Safety Instructions for the Installer
• Protection against access to live parts must be guranteed by the in-
stallation.
• The unit in which the appliance is fitted must satisfy the require-
ments of DIN 68930 in respect of stability.
• This oven must be installed by qualified personnel to the relevant
Standards.
• This oven is heavy. Take care when moving it.
• Remove all packaging, both inside and outside the oven before using
the oven.
• Do not attempt to modify the oven in any way.
• The built-in cooker and hobs are fitted with special connector sys-
tems. They may only be combined with units of the corresponding
system.
Instructions for Switzerland
Contrary to the SEV regulations governing domestic installations,
number 47330.1, the built-in oven and hob may be built into flamma-
ble material.
Components, which project into the space under the hob, must be
made of non-flammable material or be at a minimum distance of
100 mm from the lower edge of the hotplates. Flammable walls and
ceilings above the cooking surfaces must be clad with fire-retardant
materials in accordance with the current regulations of the fire author-
ities of the appropriate canton.
The second rating plate supplied with the hob top must be put up in a
position where it is covered but visible, directly in the area of the appli-
ance. (Surfaces to be stuck must be free of dust and grease).
To Next Page
Loading...
