AGCO Gleaner DynaFlex 9250 - Page 23

Safety
01-20 79034308 B Rev.
FIG. 46: To install the divider shield, engage the
mounting plate (1) onto the post (2).
FIG. 47: At the same time engage the rod support (3)
into the receiver (4) on the header frame.
FIG. 48: Insert the divider mount (1) into the divider
bracket (2).
Engage the end of the latch rod (3) into the striker (4).
Close the divider point latch (5) engaging the lock (6).
FIG. 49: The reel drive shield (1) can be removed by
removing the five mounting bolts and flange lock nuts and
removing the shield from the inner reel shield.
FIG. 46
P909521
1
2
FIG. 47
P909520
4
3
FIG. 48
3
Q213887
2
4
1
6
5
FIG. 49
P909447
1