AGFA CR 75.0 - Page 21

21
2241A EN 20040210
The status indicator
The light at the top of the CR 75.0 indicates the status of the CR 75.0.
Color
Constant/
Flashing
Status Action
Green
Constant
Ready. Proceed.
Flashing
Busy (treating image
plate).
Proceed.
Red
Constant
Error.
• Check display for messages.
•Refer to ‘General procedure
in case of malfunction’ on
page 77.
Flashing
• Locked or warning.
• Power on/self-test
in progress.
• Key-operator mode.
• Service mode.
• CR 75.0 not
connected to image
processing device.
• Check display for messages.
•Refer to ‘General procedure
in case of malfunction’ on
page 77.