AGFA CR 75.0 - Page 35

35
2241A EN 20040210
Re-erasing image plates with status ‘to be erased’
To re-erase one or more image plates which you have given the status ‘to be
erased’ via the ID station:
1 Check that the CR 75.0 is ready for operation:
• the CR 75.0 must display the operator screen with ‘Ready’ or ‘Busy’ status.
• the status indicator at the top of the CR 75.0 must be constant or flashing
green.
2 Place the cassettes in the input buffer.
The CR 75.0 will automatically erase the image plates. The display will read:
When the CR 75.0 has erased the image plates, it displays the operator main
screen.
3 Remove the cassette(s) from the output buffer.
READY
CR 75.0
Status
BUSY
* * * ERASING * * *