55
2241A EN 20040210
The CR 75.0 will display the Install software menu:
4 Open the left front door of the Digitizer.
Make sure you open the left front door first. When you open the left front door, the
power supply of all critical components is switched off automatically.
5 Insert the first floppy with the new CR 75.0 software in the disk drive.
Please open the machine
front and insert the
first floppy ACP_XXXX in
diskette drive and
press
: quit
: ok
INSTALL
SOFTWARE
SERVICE XXXXX
MUSICA
CR 75.0
CR 75.0
MUSICA
To Next Page
Loading...
