AGFA CR 75.0 - Page 65

65
2241A EN 20040210
The CR 75.0 will display the Install configuration menu:
4 Open the left front door of the Digitizer.
Make sure you open the left front door first. When you open the left front door, the
power supply of all critical components is switched off automatically.
5 Insert the floppy with the new CPF-files in the disk drive.
Please open the machine
front, insert the
CPF- floppy in the
diskette drive and
press
: cancel
: ok
INSTALL
CONFIGURATION
SERVICE XXXXX
MUSICA
CR 75.0
CR 75.0
MUSICA