DR Detector Calibration|Problem solving|34
DR Calibration Tool Stalls
Problem The DR Calibration Tool stalls.
Cause A virus scanner interferes with the DR Calibration Tool.
Workaround Disable the virus scanners on the workstation and restart the cali-
bration procedure.
Problem The DR Calibration Tool stalls for a short time.
Cause Information must be retrieved from the DR Detector.
Workaround Wait until the communication to the DR Detector has finished and
the DR Calibration Tool reacts again. This may take a number of sec-
onds.
0134KEN20240524 1323
To Next Page
Loading...
