Note: If calibration fails again contact your local service
representative.
10. Exit the Calibration Tool.
11. Start the NX software.
In the Start menu, select All programs > Agfa > NX > Restart NX
completely.
Related Links
DR 10s and DR 14s Exposure Sequence on page 20
DR 10e C, DR 14e C and DR 17e C Exposure Sequence on page 22
DR 18M and DR 24M Exposure Sequence on page 24
DX-D 10C, DX-D 10G, DX-D 20C, DX-D 20G Exposure Sequence on page 25
DX-D 25C Exposure Sequence on page 27
DX-D 30C and DX-D 35C Exposure Sequence on page 29
DX-D 40C and DX-D 40G Exposure Sequence on page 31
DX-D 45C, DX-D 45G, DX-D 60C and DX-D 60G Exposure Sequence on page 33
Fixed DR Detector (4343R, Pixium RAD 4343) Exposure Sequence on page 35
16 | DR Detector Calibration | Calibrating the DR Detector
0134I EN 20210924 1204
To Next Page
Loading...
