49
2321 E EN 20130722
DX-G/DX-M
Operating Modes
The digitizer can be operated in two modes:
Operator Mode
Service Mode
Operator Mode
The operator mode groups all basic functions which are aimed at
radiographers:
• Re-erasing an image plate.
• Rerouting of images.
• Retrieving information with the information button.
• Changing touch panel properties (brightness and loudness of beeper).
All functions of the operator mode are described in this manual.
Service Mode
The service mode functions are reserved for trained service personnel. They
are password protected, and they are described in a separate document.
To Next Page
Loading...
