AGFA DX-M - Operating the DX-G;DX-M Digitizer

3 Operating DX-G/DX-M
This chapter provides information about functions that are available in operator
mode. Finally you will find some preventive maintenance and troubleshooting
guidelines.
This chapter covers the following topics:
❑ Re-erasing an Image Plate
❑ Turning the Volume of the Digitizer Signals and Beeps On or Off
❑ Changing the Brightness of the Touch Panel
❑ Retrieving Information About the Digitizer
❑ Moving the Digitizer
❑ Troubleshooting and Errors during Operation