First-Time Set Up 1
16800 Series Portable Logic Analyzers Installation/Quick Start Guide 13
First-Time Set Up Considerations
The first time you turn on the logic analyzer, the Windows
®
Welcome session
starts. Your logic analyzer configuration and the answers to the Windows
Welcome questions are affected by how you choose to use the logic analyzer.
Determine Whether the Instrument will be Connected to the
Network
Standalone
You are going to use the logic analyzer as a standalone instrument (no LAN
connection). Printing requires a printer attached to the logic analyzer, sharing
files is done via USB flash drive or floppy disk.
Connected to a Network
If you require the ability to print, share files, remotely control the logic
analyzer, etc. over the network, you need to either join a workgroup or
domain.
NOTE
Use the Enter and arrow keys on the attached keyboard.
NOTE
If you plan to use COM automation to programmatically control a logic analyzer from a
remote computer, be aware that the remote computer and the logic analyzer must both
have the same kind of network membership; that is, they must both be members of a
"Workgroup", or they must both be members of a "Domain". This is due to the security
requirements of Distributed COM.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
