Updating the Logic Analyzer 3
16800 Series Portable Logic Analyzers Installation/Quick Start Guide 35
Changing Windows Firewall Settings
When 16800 Series logic analyzers are shipped from the factory, the Windows
Firewall is enabled and set up with the exceptions required by the logic
analyzer.
To give other applications/ports access through the firewall
For example, you may need to change firewall settings in order to:
• Use NetOp to remotely control the logic analyzer.
• Use RealVNC to remotely control the logic analyzer.
To change firewall settings to give other applications/ports access:
1 From the Windows Start menu, choose Start>Control Panel.
2 In the Control Panel window, open Windows Firewall.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
