32
5 Starting the Agilent 2100 Bioanalyzer
Turning on the Agilent 2100 Bioanalyzer
Turning on the Agilent 2100 Bioanalyzer
1 Turn on your Agilent 2100 Bioanalyzer. The power switch is located at the
rear of the instrument, where the power cable plugs in (see ).
2 The status indicator lamp will light green if power is present and all
instrument self-tests have passed successfully.
If the status indicator lamp lights red, this indicates a hardware error. In
this case, please refer to the Troubleshooting section of the Agilent 2100
Bioalyzer Maintenance and Troubleshooting Guide or the Online Help.
3 Once your Agilent 2100 Bioanalyzer has passed the self- tests, it is ready to
run samples.
4 Start your PC and printer by pushing the appropriate power buttons as
outlined in the documentation.
HiVijh>cY^XVidg
<gZZc"GZVYn
<gZZc![aVh]^c\"7jhn
DgVc\Z"HZa["iZhi
GZY":ggdg
To Next Page
Loading...
