33
Starting the Agilent 2100 Bioanalyzer
5
Connecting the Bioanalyzer via the USB/Serial Cable
Connecting the Bioanalyzer via the USB/Serial Cable
If you connect the 2100 Bioanalyzer instrument via the USB/serial adapter
cable, the driver needs to be installed on the PC. This is preinstalled on bundle
PCs but needs to be installed manually on 3rd party PCs.
The driver can be found on the 2100 Expert Software CD. For installation
instructions please refer to the
readme file of the 2100 Expert Software.
To Next Page
Loading...
