155
Chapter 4 Remote Interface Reference
SCPI Command Summary
4
Command Summary
SCPI Command Summary
Throughout this manual, the following conventions are used for
SCPI command syntax for remote interface programming:
• Square brackets ( [ ] ) indicate optional keywords or parameters.
• Braces ( { } ) enclose parameters within a command string.
• Triangle brackets ( < > ) enclose parameters for which you must
substitute a value.
• A vertical bar ( | ) separates multiple parameter choices.
(see page 170 for more information)
APPLy
:SINusoid [<
frequency> [,<amplitude> [,<offset>] ]]
:SQUare [<
frequency> [,<amplitude> [,<offset>] ]]
:RAMP [<
frequency> [,<amplitude> [,<offset>] ]]
:PULSe [<
frequency> [,<amplitude> [,<offset>] ]]
:NOISe [<
frequency|DEF>
1
[,<amplitude> [,<offset>] ]]
:DC [<
frequency|DEF>
1
[,<amplitude>|DEF>
1
[,<offset>] ]]
:USER [<
frequency> [,<amplitude> [,<offset>] ]]
APPLy?
1
This parameter has no effect for this command but you MUST specify
a value or “DEFault”.
The APPLy Commands
To Next Page
Loading...
Need help?
General
