Agilent Technologies 33220A

159
Chapter 4 Remote Interface Reference
SCPI Command Summary
4
Command Summary
PM Commands P M: INTernal
:FUNCtion {SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER}
:FUNCtion?
PM: INTernal
:FREQuency {<
frequency >|MINimum|MAXimum}
:FREQuency? [MINimum|MAXimum]
PM:DEViation {<deviation in degrees>|MINimum|MAXimum}
PM:DEViation? [MINimum|MAXimum]
PM:SOURce {INTernal|EXTernal}
PM:SOURce?
PM:STATe {OFF|ON}
PM:STATe?
FSK Commands FSKey:FREQuency {<
frequency>|MINimum|MAXimum}
FSKey:FREQuency? [MINimum|MAXimum]
FSKey:INTernal:RATE {<
rate in Hz>|MINimum|MAXimum}
FSKey:INTernal:RATE? [MINimum|MAXimum]
FSKey:SOURce {INTernal|EXTernal}
FSKey:SOURce?
FSKey:STATe {OFF|ON}
FSKey:STATe?
PWM Commands
PW M: INTernal
:FUNCtion {SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER}
:FUNCtion?
PWM: INTernal
:FREQuency {<
frequency >|MINimum|MAXimum}
:FREQuency? [MINimum|MAXimum]
PWM:DEViation {<deviation in seconds>|MINimum|MAXimum}
PWM:DEViation? [MINimum|MAXimum]
PWM:DEViation:DCYCle {<
deviation in percent>|MINimum|MAXimum}
PWM:DEViation:DCYCle? [MINimum|MAXimum]
PWM:SOURce {INTernal|EXTernal}
PWM:SOURce?
PWM:STATe {OFF|ON}
PWM:STATe?
Parameters shown in bold are selected following a *RST (reset) command.