6-13
Utilities
To set up the screen saver
3 Turn the Entry knob to select the number of minutes to wait before the
selected screen saver activates.
When you turn the Entry knob, the number of minutes is displayed in the
Svr Time softkey. The default time is 360 minutes (6 hours). The screen saver
starts automatically if your oscilloscope is idle for the number of minutes
specified in the Svr Time softkey.
4Press the Preview softkey to preview the screen saver you have selected
with the
Saver softkey.
5 To view the normal display after the screen saver has started, press any
key or turn any knob.
To Next Page
Loading...
