Agilent Technologies 5890 User Manual

3 Installation Procedure Clarity Control Module
3.4 Installing the GC module in the PC:
Select and if necessary install a fast serial port in the PC.
Caution: In the following procedure the setup of HP 5890 with digital acquisition
(without A/D converters) will be described.
Install Clarity station; in the HW Setup dialog check the None option
during installation.
Connect the GC to the PC by serial cable; turn the GC power on.
- 6 -

Agilent Technologies 5890 Specifications

General

Brand	Agilent Technologies
Model	5890
Category	Laboratory Equipment
Language	English