Agilent Technologies 5890 User Manual

3 Using the control module Clarity Control Module
3 Using the control module
3.6 Method Setup - GC
Use the From GC button to download current method parameters from
Agilent 5890 (and save it under suitable name). You can use this
procedure to copy the parameters of your methods already stored in the
GC memory to Clarity.
Use the GC Status button to see the current GC configuration (inlets,
detectors etc.)
Note: Note: in DEMO mode it enables selecting them
Use the upper tabs in the Method Setup - GC dialog to set or modify the
GC control parameters.
Fig 6: Method Setup - GC - Oven/Zones
Note: The Time Events tab is available for Agilent 5890 Series II only.
On the Signals tab, you can assign the Detector (or other signal) to the
output Signals.
- 10 -

Agilent Technologies 5890 Specifications

General

Brand	Agilent Technologies
Model	5890
Category	Laboratory Equipment
Language	English