Need help?Do you have a question about the Agilent Technologies 5975 Series and is the answer not in the manual?
General| Category | Gas Chromatograph/Mass Spectrometer (GC/MS) |
|---|---|
| Mass Resolution | Unit mass resolution |
| Ionization Mode | Electron Ionization (EI) |
| Interface | Ethernet, USB, optional analog and digital I/O |
| GC Compatibility | Agilent GC systems |
| Sensitivity | 1 pg octafluoronaphthalene (OFN), S/N ≥ 1000:1 (EI mode) |
Legal terms for the manual's content and its use, including warranty disclaimers.
Explains CAUTION and WARNING notices used in the manual for hazard identification.
Describes the manual's content and scope for operating and maintaining the MSD.
Details accompanying manuals and tools for the 5977B MSD.
Refers users to documentation for models prior to the 5977B.
Provides a detailed description of the MSD hardware components.
Lists critical safety notices to be observed when using the MSD.
Details the hazards and precautions associated with using hydrogen as a carrier gas.
Lists safety standards and regulatory compliance for the MSD.
Discusses GC column types, restrictions, and gas flow rates for MSD compatibility.
Explains the importance and procedure for conditioning capillary columns before use.
Provides step-by-step instructions for installing a capillary column into a GC inlet.
Describes how to calibrate column flow linear velocity for accurate measurements.
Explains the heated conduit connecting GC and MSD for capillary columns.
Discusses Intuvo 9000 GC column types and restrictions for MSD use.
Explains the process of conditioning Intuvo columns before GC/MS interface connection.
Step-by-step guide for replacing an Intuvo GC column.
Instructions for installing consumable column guard or jumper chips.
Procedure for replacing the GC/MS tail component.
Explains automated tasks using OpenLAB CDS software for MSD operation.
Details how to control the MSD using the 7890B GC control panel.
Steps to configure MSD network settings via Web User Interface (WUI).
Explains operation of MSD using the Local Control Panel (LCP).
General information and safety precautions before performing maintenance.
Outlines the maintenance schedule for reducing problems and prolonging system life.
Describes periodic tasks for maintaining the instrument's vacuum system.
Details maintenance tasks for analyzer components like ion source and filaments.
Step-by-step guide for opening the analyzer chamber for maintenance.
Procedures for removing specific components of the EI HES.
Instructions for replacing filaments in EI HES, XTR, SS, or Inert sources.
Steps for cleaning EI source parts to maintain performance.
To Next Page
