Agilent Technologies 5975 Series User Manual

5975/5977 Series MSD Operating Manual 29
2 Installing 7890/7820/6890/6850
GC Columns
Columns 30
To Install a Capillary Column in a Split/Splitless Inlet 32
To Condition a Capillary Column 35
To Install a Capillary Column in the GC/MS Interface Using the Self-Tightening
Column Nut 36
To Install a Capillary Column in the GC/MS Interface Using a Standard Column
Nut 41
To Install the Interface Tip Seal 44
To Calibrate Column Flow Linear Velocity 46
The GC/MSD Interface for a 7890B Series GC 49
Before you can operate your GC/MSD system, you must select, install, and
condition a GC column. This chapter shows you how to install and condition a
column. For correct column and flow selection, you must know what type of
vacuum system your MSD has.

Agilent Technologies 5975 Series Specifications

General

Brand	Agilent Technologies
Model	5975 Series
Category	Laboratory Equipment
Language	English